Category Archives: Automotive

Different Microfiber Cloths for Detailing a Car

Published by:

Different industries make use of microfiber material for a wide range of purposes. Usually, this material is used for the sole purpose of cleaning. It is the result of a combination of human-made materials like polyester fibers and finely woven polyamide. Its characteristic softness is derived from the fine polyamide component that it is made from. On the other hand, the durability and strength of microfiber are a contribution of its polyester component. With these two materials combined, what you get is a material that withstands hard-wearing use. It is also among the best options if you need to do car detailing or waxing.

Different kinds of microfiber cloths, mitts, and pads can be utilized to give any car a good clean. Know the commonly known types of microfiber used for car detailing.

General purpose
The most typical microfiber cloth used for general purposes comes with the standard terry cloth weave. It has a combination of 80% and 20% polyester and polyamide, respectively. This material makes an amazing all-purpose cleaning option for wiping glass, plastic, leather, paint, and vinyl. To make cleaning more effective using this material, choose a cloth with a relatively good thickness level.

Polishing work and glass cleaning
The microfiber cloth you use for polishing work and glass cleaning should be 100% lint-free. Unlike the general-purpose cloth, this particular material comes with short naps. Nonetheless, it still offers the right level of scrubbing power. This cloth should be effective in removing marks left by water such as streaks. To avoid or minimize scratching delicate surfaces from your car, choose a microfiber cloth with no edge.

For drying purposes, you can use microfiber cloths with either terry or a waffle cloth weave. Cloths with very short terry loops are much more effective for purposes of drying. Avoid cloths with a heavy and plush nap because in case they get wet, they become harder to wring out. Both terry and waffle cloths are effective at absorbing water. However, if you want something that would hold water much longer limiting the number of times you wring out your cloth, then you should choose the latter.

When cleaning your car, you want to choose a very coarse microfiber cloth. Moreover, they should have a tight nap and strands that are not split. This particular microfiber cloth is not made to be the most reliable choice for soaking up water. This implies that it should never be utilized for fine car detailing. It should, however, be great for the typical janitorial work that you must do. The best microfiber cloth options for these purposes include the waffle weave cloths and polishing cloths.

Having read all of these variants of microfiber cloths, you now know which one you should get for your car detailing work and more. This information is essential if you do not want to add unnecessary damages to your car as you clean it. Once again, not all microfiber cloths are the same. You want to make sure to use the right kind for your specific purpose.

Everything You Need to Know About Brake Discs Used in Commercial Vehicles

Published by:

Brake discs differ between passenger-driven vehicles and commercial vehicles. Take, for instance, their lifespan. Because commercial vehicles usually carry heavier loads and spend more time on the road, the use of brake discs is more intense. You can also expect frequent brake repairs. In short, commercial brake discs have a shorter lifespan than their counterparts.

Nonetheless, brake discs used in commercial vehicles can still be utilized to their full potential. To do so, they must meet a certain set of criteria. And they are as follows:

• Reduced judder and wear: The materials used in the rotors must be stronger. They should be resistant to friction, heat, and wear. These are parts that you do not usually see in lightweight or passenger vehicles. This is because they are both much heavier and bigger than the standard brake disc model. This characteristic criterion for brake discs used in commercial vehicles also ensures low tolerance levels.

• Withstands heat: Technology has contributed a lot to make use of specialized materials for the manufacture of these parts. These specialized materials can disperse friction-induced heat more uniformly and much easier. Under high pressures, uniform dispersion ensures that the shape and surface will not crack or deform.

• Works well under force: As stated, most commercial vehicles are used to carry very heavy loads. Drivers have a harder time stopping them because of their higher momentum. Thus, brake discs should be enhanced accordingly. They should be strong enough to slow down the vehicle while making sure that no breaking or cracking happens from the intense weight.

• Uniform wear: The root cause of uneven wear is many. Perhaps another component is not even or the car may be overloading. When it comes to vehicles, they are expected only to withstand standard weights. Going over the limit could lead to uneven brake disc wear and engine overload. Though discs can be skimmed, it is a practice that can decrease the quality and function of the material.

Now that you know the things that make brake discs fitting for commercial vehicle use, you should also know when these discs become problematic. Problematic discs are not so hard to notice. Below is a list of descriptions of the most common brake disc problems to help you better spot them.

• Blue discs: Discs turn blue when they suffer from high temperatures. Very high temperatures are often caused by constant brake use and heavy stopping. Make sure to check the caliper in case the problem is found there.
• Heat checking: Heat and cold create a pattern that is akin to stretch marks when the discs are put under intense levels of pressure. They also appear when rapid cooling takes place.
• Spots and cracks: If your discs look uneven and patchy, they are caused by excessive heating. You can avoid this by properly applying your brakes minus the sudden stopping.

Safe braking can only be assured if you make it a habit to regularly check your brake discs. Because commercial vehicles are put under a lot of pressure and use, they should be properly maintained and regularly checked. Always remember that more time spent on the road can affect the quality of engine parts and components.

What to Do When an Engine Overheat Happens

Published by:

Automobiles, even with the advancement of technology, are still powered by motors that produce large amounts of heat energy. Heat is always generated whenever you use your car in driving or even turning on your car’s air conditioner. What keeps the vehicle from overheating is its radiator which is responsible for transporting heat from the engine through a thermal heat exchange process. Because a car radiator is the only component in the vehicle that balances the heat, it must always be in good condition.

The radiator must have enough amount of liquid coolant stored on its core. When the fluid amount goes below the sufficient level, the engine of your car will overheat, resulting in your car to stop running or shut down. Whenever your car radiator fails to work properly, you have to know what you to do to remedy the situation.

Things to Do During an Engine Overheat:


What you should do immediately when your car engine overheats is always to pull over to the side of the road. You would not want to be involved in an accident by staying in the middle of the way when your car is already about the shutdown. Furthermore, attempting to use your car with an overheating engine can cause harmful damages to your car’s engine. Thus, you should never drive your car when it overheats because it might lead to permanent damages to your vehicle. It can also be dangerous to you or anyone inside the vehicle. Surrounding engine parts can blow, and head gaskets can blow up, leading the car into flames.

Once you notice signs of overheating, such as smoke coming out from your trunk or front side of the car, you should immediately pull over to a safe area. If there is a parking lot near the area, drive slowly until you reach the place.


After pulling over, you have to turn off your engine immediately. Do not forget to turn on your hazards to let people know of your situation, especially if you pulled over in a dark area. Many people make the mistake of opening the hood of the car right away, but this is a big mistake. The car radiator and engine are still very hot, and touching them can cause third-degree burns. What you should do is to allow the engine to cool off for several minutes. Letting it cool off for at least fifteen minutes is the ideal waiting time. If you feel the need to wait a little longer, do so before opening the hood. This way, you could be assured that you will be free from any injury.


As the engine has fully cooled down, check your vehicle for any signs of leaking. Fluid leaks could mean that there is a cracked radiator or a faulty radiator hose. If you cannot find any sign of leaking, investigate the oil. Take away the dipstick and check on the color. If the color is brown and muddy, it could mean that liquid coolant of the radiator is seeping into the engine.

Choosing the Right Car Cleaning Services

Published by:

All car owners always have the responsibility to maintain the cleanliness of their car. Cars easily get dirty because they are always exposed to earthly elements, such as mud and dust. However, we are not just talking about the exterior of the vehicle; the car’s interior also needs the same amount of cleaning. The insides of a car can get more soiled than the exterior. Keeping your car clean should be a regular routine. However, if you don’t have the luxury of time to do the chore on your own, you need some help. Fortunately, there are car cleaning service providers available to help you maintain or restore your car’s mint condition.

Professional car cleaning services are easy to find these days. Almost all urban areas have at least one car cleaning shop available. However, not all of these cleaning service providers offer the same quality of car maintenance. Car cleaning is not as easy as simply wetting the car and wiping off the surface. It involves a quite complex task of removing some parts and washing them individually. Removing stubborn dirt and cleaning floor carpets and car seats are not easy tasks. Knowing how to clean a car properly will help you get to the right car cleaning service. To avoid wasting your money on the wrong people, you have to avoid these mistakes:

Getting a Rush

Most people would often go to the cheapest car cleaning service. Although budgeting is always recommended, it is not wise to rush to the most affordable car cleaning service shop. They may get the job done, but if you look closely, you will not be satisfied with the results. Most cheap car cleaning services are done without thorough cleanup. Stubborn dirt may still be present in unnoticed corners of your vehicle. Because of this, you should not settle with poor quality services to save more money. Think of car cleaning as an investment. You get a completely clean car for some amount of money. Besides, car cleaning is not necessarily done weekly. Monthly cleaning is more than enough to keep your car looking brand new.

A professional car cleaning company would provide you a quote before they would start their services. The cost of the cleanup would be based on the size of your vehicle and the amount of work needed to get the job done. Poor quality car cleaning services would just charge you with fixed rates because their method of cleaning is just generic for all types of cars.

Not Asking About Packages

Some car cleaning companies offer service packages to their valued customers. Packages greatly reduce your total expenses in the long run. Some car owners are just too shy about the packages being offered by the company. Most car cleaning service providers do not advertise their promotions for their own reasons. If you are new with professional car cleaning service, you should ask what is included in their cleaning service. Some of the included services may not be needed for your own specific car. This will reduce the total cost of the service.

The Factors That Affect Trailer Stability

Published by:

Trailers are huge transport machines that are non-steered and non-powered. They are hooked at the back of a vehicle, particularly a truck, and are used for transporting cargos or any large and heavy equipment. Vehicles that can be attached with a trailer are minimal. A vehicle must have the capability of handling the weight of the trailer or else it will not be able to pull it along. Other than that, even a capable vehicle can be attached with any trailer. There are various factors that you need to be aware of for the safety of everyone on the road.

One of the factors that can affect your steering and stability while driving a truck with trailer is wind. Wind may catch you off guard, especially while on wide roads. Large and heavy vehicles may not be affected by even the strongest winds, but when attached with a trailer, things will set off differently. As previously mentioned, trailers are non-steered. The control of the direction where the trailer will be going is all based on your maneuvering with the vehicle’s steering wheel.

Elongated trailers are more prone to instability when struck with high-pressure winds due to their length. The longer the trailer means the more difficult for it to be controlled mainly due to the huge gap from the vehicle and the hind wheels.

Another factor that could affect the trailer’s stability on the road is the surface on which you drive on. Trailers have less sophisticated suspensions than most standard vehicles. A small bump can cause stability problems on the trailer. In some case, the load will be shifted to a different direction. Huge trailers are not recommended to be driven on unpaved roads because there are more chances of uneven terrain and large bumps on the surface. In cases where rural unpaved roads are the only option, drivers have to maintain driving at prolonged speeds to keep the trailer from steering on its own.

The performance of the trailer might also be affected by the type of load it carries. The load has a significant cause on how towing vehicles behave on the road. The easiest to pull are loads that are low and static. The explanation for this is due to the low center of gravity of the load, which makes it stationary. Tall loads are more susceptible to rolling over at high speeds. They have high center of mass, which makes them very easy to lose traction. Towing animals can also be quite tricky. It requires a bit of vehicle handling skills because live animals move quite a lot. Big animals, such as pigs and horses, will cause slight instability on the trailer when they move.

Some other factors affect the instability of trailers attached to trucks. Some of them may be insignificant in normal conditions, but tragedies may happen because of them. Knowing those factors can help improve your safety on the road.

What You Should Know About Car Wraps

Published by:

Do you want to give your car a complete makeover? Perhaps you should consider getting a car wrap. Car wrapping is a process by which a large sheet of vinyl is applied to your car exterior. The color of your car can be changed according to your preference and give it a brand new finish.

The vinyl is considered as an additional layer of your car exterior, protecting it from minor abrasions and stone chips. It has a thickness that is just enough to cover the paintwork of your car without being too obvious. If any section of the car gets damaged or tainted, the vinyl covering can easily be replaced or repaired. Car wrapping is not done with a single sheet of vinyl but with multiple large sheets. Damaged panels can be re-wrapped at any time without redoing the entire car wrapping process.

Auto parts stores mostly offer car wrapping services but some car dealership shops may also have this service. Installers start with a quick check on the car, making sure that all parts are intact. A thorough cleaning is then conducted to remove any bumpers, rubber seals, stickers, badges, and some other components of the car. If your car has bumps or holes on its surface, they will have to be treated first for better results. After which, the installer then slowly and carefully apply the vinyl sheets, making sure that all the edges are wrapped around. They also make sure that are no loose fitting sheets on any part of the car. A heat gun is utilized to remove any bubbles or loose fitting.

After all the piece are wrapped with the vinyl sheets, the removed parts will then be reinstalled, creating a high-quality finish.

Instead of a traditional car repainting, many car owners often go with car wrapping services for the following reasons:

  1. Quick makeover

For car owners who want a new color to their car, car wrapping is the best option. It provides a seamless color change of your car, even making a better appearance than its previous color. Many car wrapping companies offer a standard range of colors, but some offer some rare ones. You can choose to combine different colors for your next car wrap.

  1. Improve selling value

Old and worn out cars have poor market values, not unless they are given a makeover. Instead of getting a standard repainting job, which is not very appealing to buyers, most car owners would go for car wrapping. It is also the most appealing option for car customization fanatics. Vinyl sheets will help your car be sold at a higher value due to its appearance and added protection.

  1. Limitless Styling Options

You get various options with car wrapping. You can go for matte colors, shiny ones, or even psychedelic colors that you would not find in any other car. The color options are basically limitless with car wrapping. If you want to include texts or images, it is also possible by precisely cutting the vinyl sheets to your desired graphics.

Is The World Ready for Self-Driving Cars?

Published by:

The car industry is moving into the future at a very fast pace. Modern technologies are now incorporated into automobiles, adding various useful features other than simple transportation. Cars today have already been digitalized with the integration of touch screen LED monitors and GPS devices. The auto industry has many innovations, yet nothing is more mind-blowing than the idea of a driverless car. Just imagine a car moving without a human driver. It is almost unthinkable. However, self-driving cars exist in some countries already. Even though there are still a lot of things to polish, self-driving cars are becoming the next big thing in the industry. But is the world ready for them?

If the mechanism of self-driving cars is perfected, it will bring lots of benefits to the people. Instead of focusing on the road, riding the car means everyone is now the passenger. You get to enjoy your snacks, watch your favorite movie, and even play some card games with your friends. This makes life more convenient by transporting people to their destinations without needing to drive. Anyone would want a personal driver to take you anywhere you want. The cost does not do it.

Although the idea of self-driving cars is a great one, there are still lots of uncertainties with driverless vehicles. For a self-driving car to work, a special software program is installed in its system. This means that the driver is actually the computer and we all know that computers are not perfect. They are prone to cyber attacks, bugs, and malware malfunctions that will most definitely result in catastrophic consequences. Manufacturing and software companies are currently looking for ways to address these uncertainties.

The current models are still being tested out on public roads under different kinds of weather. Self-driving cars seem to have complications during rainy situations, which could be a result of an affected GPS. Other than that, their navigation mostly depends on the mapping software used by their manufacturing company. Stationary and moving objects have to be identified to avoid a collision. Some models have built-in radars to detect objects from a specific distance. If an object is detected to be too close to the vehicle, the auto will trigger either a stop or a turn to evade it. This is an example of how self-driving cars work.

So what will happen if self-driving cars take over the roads? Perhaps, there will be more cars than ever before. People would be much more enticed to buy a self-driving car once they know they are perfectly safe with it. The convenience in transportation is undoubtedly worth investing in. Manufacturers think that self-driving cars would get rid of traffic and congestion, but what will happen will most likely be the opposite. People will quickly get a ride, and although there will be fewer road accidents, there will probably be more people on the road.

Simple Tips On How To Effectively Prevent Road Collisions

Published by:

You should know by now that almost all road collisions are attributed to the errors of humans. Albeit the fact that you are driving carefully and that you are following all the traffic rules and regulations, the thing is that this will not guarantee your total safety on the road. The reason for this is because road collisions can happen due to the recklessness and carelessness of others, and this is already beyond your control. There are some precautions that drivers and even their employers can take for the sake of reducing the odds of getting involved in road collisions and also, to minimize the risk of being injured during the accident.

Be Vigilant. For sure you know how getting distracted while driving is one of the leading causes of road collisions. If you are driving, you must never multitask. If there is something that you want to do, you better stop the car at the side rather than doing it while driving. Some of the things that are capable of taking your attention away from the road and even reduce your reaction time are the following: phones, noisy passenger, and food. All these things must be cut out before its too late for you. You have to bear in mind all the time that the activities of other drivers on the road tend affecting your safety. Hence, it is vital and essential on your end to keep an eye on drivers that are driving unsafely so that you can avoid yourself getting caught up in a potential road accident. You have to see it as well that you are putting a safe distance between you and the car ahead of you. This will give you the chance of reacting fast if the car ahead of your abruptly stops.

• Proper Monitoring. There are several drivers out there who think that they have the right to do whatever they want to do once they hit the road as their employers are oblivious of it. There are those who are taking undeserved breaks or even run personal errands, which lead them to over speed to cover for the lost time. Thankfully, the advent of technology has made it possible for drivers to be monitored while they are on the road. We now have the GPS or the Global Positioning System which possess tracking features that will monitor and check the drivers. These GPS tracking features enable employers to know where and how fast their drivers are moving in real time. It is important to be sure of your drivers that they are leaving early for an appointment as this will reduce their chance of rushing while on the road. Furthermore, you have to make it a point as well to monitor them all the time to ensure that they are exceeding the regulated speed limit. If you notice that your driver has been drinking or is drunk, prevent them from driving. Regardless of how small or large the consumption of alcohol is, it will still affect their driving. And lastly, they must be given enough time to rest and sleep. Tired drivers can also cause danger on the road.

Introduction To The Different Types Of Turbos

Published by:

There are various ways to improve the horsepower of a car’s engine, and one of these ways is by the use of a turbocharger. When we say turbocharger, we are referring to an induction device that is using the force created by a turbine to inject extra air at increased pressure, temperature as well as density into the combustion chamber of an engine. This will lead to the improvement of the engine’s horsepower and efficiency. The use of a turbocharger will also enhance the overall performance of a car.

If you are wondering what turbochargers can do, well, there are tons of them like enabling an engine to produce similar power as what heavier engines produce. The exhaust gas that is being used by a turbocharger to operate is energy lost in an automobile engine that is usually aspirated. There are lots of turbochargers that are used in cars, and every single one of them has their characteristics, drawbacks and even benefits. If this piqued your curiosity, then you must continue reading this article until the very end to find out more about it.

• Single turbochargers are known for their ability to offer amazing variability and cost-effective methods as well in terms of increasing the power of a car’s engine. This particular type of turbo is said to be relatively easy to install. The addition of this kind of turbo leads to the production of equivalent power, which is similar to larger and normally aspirated engines hence, increasing the performance of the vehicle.

• The twin-turbo is known for being similar to single turbos, and also, it possesses several relevant options to be taken into account. A single turbocharger is possible to be added to every cylinder bank, regardless of whether the engine is a V8 or a V6. On the other hand, parallel twin turbos that are on V-shaped engines have similar benefits as to single turbos, and they are possible to be placed in a sequential manner or in any other configurations that can enhance the torque as well as the power of the engine.

• The next one that we have here in our list is the Twin Scroll Turbo Cylinder. This particular type of turbos is said to be programmed to feed a particular scroll or the other, allowing the improvement of the horsepower of the engine to become a possibility. This can be made by maximizing the efficiency as well as the efficacy of the turbocharger. That is not it at all as we want you to know as well that the addition of a twin scroll turbo will enable for more energy to be translated into the wheels of the vehicle. If you want to be guided more on this, we suggest that you coordinate with your wheel supplier. The varying designs of scroll allow for a much wider RPM range, therefore, causing the effective boost of the turbocharger to be enhanced. If you want to install a twin scroll turbo cylinder, make sure that you have the engine layout and the exhaust design that it needs.

Getting To Know More About The Things You Must Not Do When Modifying Your Car

Published by:

Yes, the car you have bought yourself indeed is for you to change and enhance on your own free will; however, you have to be aware of how some modifications done to your car could get you into huge trouble. Before you modifying or making any changes to your car, you have to make sure first that these are not one of the things we will mention below:

• Nitrous Oxide Cylinders Installation – one very important thing that you have to know of regarding these features is that it is a very intense performance boosting parts that can make your car shoot forward with incredible speed and force. There are tons of movies that are using these parts; however, these films are far from reality cause if the actors were able to handle these features, you might not. There are lots of drivers out there who cannot handle nitrous oxide because of its amazing force.

• Another car modification that you should not dare implement on your car is the use of big wheels. Always bear in mind that vehicles are specifically made to possess a standard wheel well size that can only fit or match the certain size of wheels and tires. What usually happens if you push to provide bigger wheels and tires to your car is that there is the risk of rotating against the well, causing the rubber on the tire to wear down. Not only that, it’s also a fact that fitting bigger wheels can lead to the risk of shaving off some parts of the rubber. There is a high chance of you as well to hit the road at extreme speed. This will put other drivers at the risk of getting into an accident since their attention and focus will be distorted and disturbed.

• Other than the things that we mentioned here in this article, there are still some things that you must avoid doing when modifying your car like the use of dark tints. It is essential for your car to have visual clearance through the windows of it. According to traffic rules and regulations, tints that are blocking the face of the driver is noted as an offense. The only windows of a car that is allowed to have extremely dark tints are the back windows; however, they must not be completely black at all. Having a clear window will help you in case of emergency or if your car was stolen since you can immediately report it. The police will have an easy time describing the driver who took your car away from you.

• Aside from that, we want you to know as well that having loud exhaust is a big no-no when modifying your car. This is because loud exhaust is not only irritating to the ear; it can also cause you to be fined by traffic officers or even the police. The thing with the loud exhaust is that it disturbs the peace in certain areas. There is a specific limit to how loud your exhaust can because if it went overboard, you might get pulled over and fined for it.